MY CONTRIBUTION TO THE LANCER TUNER COMMUNITY TUTORIAL: CONVERTING HEADLIGHT DRL TO FOGLIGHT DRL BEFORE YOU BEGIN: PLEASE USE ANY SAFETY EQUIPMENT AS MUCH AS POSSIBLE PARKED YOUR VEHICLE PROPERLY AND WORK IN A SAFE PLACE FOLLOW THE INSTRUCTIONS CAREFULLY MATERIALS: SIX (6) 9006 EXTENSION WIRES WITH MALE AND FEMALE ENDS MALE & FEMALE CONNECTORS (ABOUT 20 OF EACH) TWO (2) HIGH-HEAT 9006 HEADLIGHT FEMALE PLUGS SCREW DRIVER ALL-IN-ONE PLIERS/WIRE STRIPPER/CRIPPLERS WE BEGIN: OPEN YOUR HOOD AND DISCONNECT THE NEGATIVE TERMINAL FROM THE BATTERY. FOGLIGHT SECTION: REMOVE THE FOGLIGHT COVER AND REMOVE THE FOGLIGHT ASSEMBLY * LOCATE THE FOG PLUG'S WIRE AND CUT IT OFF ABOUT 3†FROM THE PLUG. FOR THE MAIN WIRE, STRIP IT AND CRIPLE A FEMALE CONNECTOR. FOR THE FOG’s PLUG WIRES, STRIP IT AND CRIPLE A MALE CONNECTOR. * GRAB 1 EXTENSION CUT-OFF THE FEMALE END, STRIP THE WIRES AND PUT A FEMALE CONNECTOR. * EXTENSION LAYOUT * NOW GO UNDER THE HOOD, LOCATE THE PLUG THAT CONNECTS TO THE HEADLIGHT, REMOVE IT FROM THE HEADLIGHT AND CONNECT THE NEW FOG’s EXTENSION THEN SLIP THE OTHER END UNDER THE HEADLIGHT HOUSING ALL THE WAY TO THE Fogy’s HOUSING. * CONNECT THE EXTENSION TO THE FOG’s PLUG THAT HAS CONNECTORS. PLS NOTE THAT BLACK WIRE ALWAYS CONNECTS WITH THE OTHER BLACK WIRE. * IF YOU WANT TO CHAGE TO FOGLIGHT BULB NOW IS THE TIME. NOW WERE DONE WITH THE FOGLIGHT SECTION, BUT DO NOT RETURN THE FOGLIGHT ASSEMBLY JUST YET. FOR THE HEADLIGHT SECTION: GRAB ONE (1) HIGH-HEAT 9006 FEMALE PLUG AND CRIPLE A MALE CONNECTOR TO IT. (I used a high-heat plug cuz I am currently using an Artic Blue 100w headlight and I not sure if the extension were high-heat ones) * GRAB AN EXTENSION, CUT-OFF THE FEMALE END AND CRIPLE A FEMALE CONNECTOR AND CONNECT THE HIGH-HEAT PLUG. PLS NOTE THAT BLACK WIRE ALWAYS CONNECTS WITH THE OTHER BLACK WIRE. * GRAB ANOTHER EXTENSION, CUT-OFF THE MALE END AND CRIPLE A MALE CONNECTOR AND CONNECT THE TWO EXTENSION WITH. * NOW CONNECT THE HIGH-HEAT PLUG TO THE HEADLIGHT AND AGAIN, SLIP THE OTHER END ALL THE WAY TO THE FOG’s HOUSING. * NOW GRAB THE END OF THE EXTENSION THAT CAME FROM HEADLIGHT AND CONNECT IT TO THE FOG’s MAIN WIRE. PLEASE NOTE THAT BLACK WIRE CONNECTS WITH OTHER BLACK WIRE * RECONNECT THE EXTENSION FOR THE FOG’s AND RETURN THE FOGLIGHT ASSEMBLY BACK TO ITS PLACE AS WELL AS THE COVER. * NOW DO THE SAME PROCEDURE ON THE OTHER SIDE. WHEN YOU’RE DONE, RECONNECT THE NEGATIVE TERMINAL OF THE BATTERY. TURN ON YOU HEADLIGHT AND THE FOGLIGHT SHOULD GO ON AND WHEN YOU TURN ON YOU FOGLIGHT, YOU HEADLIGHT SHOULD GO ON. *ESTIMATED LABOR TIME -1 HOUR THE REASON WHY I USED CONNECTORS IS TO EASILY RECONNECT THE ORIGINAL FOGLIGHT PLUG TO ITS ORIGINAL WIRES. I’LL BE GETTING MY HIDs PRETTY SOON I’LL UPDATE ONCE I GET THEM INSTALLED ON HOW THEY WORK WITH THIS METHOD HOPE THIS HELP TO SOME LT MEMBERS OUT THERE.
I have HIDs, but this looks like i will need some free time if im gonna do it just so i can do it right. But thanks for the info.
you dont have to do it this way. you can always disable your drl's and use the parking lights and relay to turn on your hid's
just wondering if u do it this way will ur fogs be on all the time not just as drl? like when u turn on ur headlamps do the foglights still stay on or do they shut off until u turn on the fog lights?
thanks for the complement. to answr azn_ghetto question, yes the foglight will stay on with low output energy just like when it was on the headlight. it will get brighter when you turn on the headlight and when you turn the foglight the headlight turns on. since i couldnt disable the headlight DRL, I decided to use my foglight as my DRL, to me I like it that way. it actually looks a lot better, the way I see i mean. hopefully some other members feel the same way
JASON CAN WE MOVE THIS TO A TUTORIAL SECTION! thanks for a great write up and great pics...we love pics
got most of my materials at my local auto store, but i know the extensions are pretty hard to find, but try looking at some auto performance shops...some might carry the converters instead (9006 male to 9005 female) , if you happen to see one like these, they would work...you can shave off the little groove on the female end to be able to connet the 9006 bulb... you can also look at craigslist mainly look for someone that sells HID...thats how I got mine...I got for $5 a pair, but if you buy them from a shop they might charged you like $15 a piece
red headed blonde question here.. a. whats drl and b. whats the point in this>> just seems like u switched switches
A) Daytime Running Lights. B) And its done because the stock daytime running lights mess with High Intensity Discharge lighting.
THANK YOU!!! look AND your from daytona ur just like my neighbor..lol sometimes in tallahassee and sometimes in palm coast.. you plannin on spring break nationals??
Awesome mod. Would this be what you're talking about 9006 to 9005 converter, which would do the job? http://cgi.ebay.com/ws/eBayISAPI.dll?Vi ... 0184310991 I figured I would make sure before buying, and also share a place where you can purchase them online. Thanks.
i done this to my car and have to tell you i love it. this write up was my guide, it's right on money. if you would like to change your DRL to fogs this is the way to do it.