/ Register

Please help with PAC SWI install.

Discussion in 'Audio, Security and Electronics' started by jc, Apr 8, 2009.

  1. jc

    jc Well-Known Member

    i got the PAC steering wheel controls SWI-PS for my Pioneer Avic 700BT
    but the colors dont match the wire harness?
    checked the website but doesnt really help. it only list up to 03 Lancer.
    i have the 09 ES-Sport.
    if you have any tips
    they will be greatly appreciated.
     
    jc, Apr 8, 2009
    #1
  2. SeRious08

    SeRious08 Well-Known Member

    SeRious08, Apr 8, 2009
    #2
  3. jc

    jc Well-Known Member

    Thanks for your help.
    i really appreciate it..
    will try it 2morrow.
     
    jc, Apr 9, 2009
    #3
  4. jc

    jc Well-Known Member

    Hey Serious,

    Or any one that might know this.. i preety much tried connecting the white cable on the PAC to every blue cable on the harnesses. but wasnt able to get it
    working. do u guys know what exact harness it goes connected too?
     
    jc, Apr 17, 2009
    #4
  5. SeRious08

    SeRious08 Well-Known Member

    On the 09 it may not be blue. Just make sure you are connecting it to pin 22.
     
    SeRious08, Apr 17, 2009
    #5
  6. LTDan

    LTDan Well-Known Member

    where is pin 22? looking for the harness as well
     
    LTDan, Jul 7, 2009
    #6
  7. LTDan

    LTDan Well-Known Member

    jc... did you figure this out yet?
     
    LTDan, Jul 7, 2009
    #7
  8. LTDan

    LTDan Well-Known Member

    Ok... so after tapping into every single wire I finally figured it out! you have to connect to the blue/grey and black/grey wires from the radio wiring harness... you know, the only harness from the stock system that hooks up to the aftermarket headunit... duh. anyways, I can finally control my F90BT from my steering wheel!
     
    LTDan, Jul 7, 2009
    #8