How to: Install Evolution X MR spoiler

[XxLaNcErGTSxX]

Hello and welcome to another one of my how to's. Today I will be installing my Evolution X MR spoiler.

Tools Required:
10mm socket wrench
Razor blade
Silicon
Drill + Drill bit

1st you will have to remove the GTS spoiler with the 10mm socket wrench.


2ed You will have to lift up as hard as you can, and cut the double-sided tape with a razor blade



3ed. You will now notice that your car has no spoiler.


4th You will also notice that once you have the spoiler off that there is still glue from the foam gasket left on the hood. Take the razor blade and scrape it off.



5th. Now you will notice a 3ed hole in the trunk. This is where a white tab from the GTS spoiler. You do not need this so fill it in with silicone.


6th. Now you will have to make your own gaskets. I was trying to order them but I never recieved them so I went to AA and bought something that was somewhat thin and waterproof.


7th. You will now have to place the gasket on the spoiler. I used silicon to place it on the spoiler.



8th. Now you are ready to drill. You will see a spot to drill your hole on the bottom of the trunk (when it is open.) It is a little punch hole. Drill



9th Now you are ready to install the spoiler. Place the spoiler in the pre drilled GTS holes and bolt them into place. Next Bolt the other hole. I did not use the 3ed hole in the spoiler. Just did not seem necessary.


10th. Use your silicon to cover the bolts so they do not leak. Also silicon the hole from the GTS spoiler that is not used


Congrats you have now installed your new spoiler.

[08Lancer89]

sweet can you take side pics

[XxLaNcErGTSxX]

sweet can you take side pics

[Nemo420]

when did the MR come out? and that looks just like the one that comes on the GSR.

[eKtor]

Thanx for the write up!

[XxLaNcErGTSxX]

when did the MR come out? and that looks just like the one that comes on the GSR.

Well I only said the MR bc the MR comes stock with this spoiler.

[HudsonFalcon]

when did the MR come out? and that looks just like the one that comes on the GSR.

I believe they're both the same.

[Nemo420]

when did the MR come out? and that looks just like the one that comes on the GSR.

Well I only said the MR bc the MR comes stock with this spoiler.

are you sure cuz the MR is not out yet and who knows if they will keep that spoiler or even if that car is going to come out at all. it just weirded me out when i seen MR SPOILER

[XxLaNcErGTSxX]

The MR is coming out, and yes it will have this same spoiler.

[kennyjai]

now where can we get that?

[Lookslikeanevo]

stock wing > evo high wing

[JDMFanatik]

pics of the whole car shot on side and back? and maybe at an angle from the front or back please?

[XxLaNcErGTSxX]

pics of the whole car shot on side and back? and maybe at an angle from the front or back please?

Tom when it is light out

[kingklay]

Looks awesome!!
definitely need to see a whole side pic

[BaD2RaSS]

yeah lets see the whole car angles and from the side

Kyle

[Milagro]

just like on my GSR

I love this spoiler!

[Knotikz]

What size drill bit did you use?

[XxLaNcErGTSxX]

Ok updated pics. I know you guys wanted side shoots of the new spoiler so here you go.

[RedStar]

I think a kit is needed to pull that wing of. But it sure looks better than that grey lancer that has an x wing online.

[Dukekid0987]

how much did everything end up costing you?

[LancerGTS]

that is beautiful! The MR is out i saw it at the dealer couple days ago. Looking good bro!

[kennyjai]

where can i get one??